Presentation; Cutting Unit; Lifting Lever For The Cutting Unit - Jonsered FR 2213 MA Operator's Manual

Presentation

Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years. Four models
equipped with engines from Briggs & Stratton are described
in this operator's manual.
The power transmission from the engine is handled by a
hydrostatic transmission, which allows variable variation of
the speed by using the pedals.
FR 2216 MA 4X4 is equipped with all wheel drive.
Parking brake
The parking brake is applied as follows:
1 Press down the parking brake pedal.
2 Press in the lock button on the steering column.
3 Release the parking brake pedal while keeping the button
pressed in.
The parking brake lock disengages automatically when the
brake pedal is pressed.
Throttle and choke controls
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
The control is also used to activate the choke. When the
choke is engaged a richer fuel and air mixture is fed to the
engine, which facilitates starting in the cold.
12 –
English
PRESENTATION
Speed limiter
The speed of the machine is steplessly regulated with two
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
!

Cutting unit

FR 2213 MA, FR 2216 MA and FR 2216 MA 4X4 have a
Combi-unit
The Combi-unit, equipped with a Mulching-plug, finely chops
the cuttings to fertiliser. Without the Mulching-plug the unit
works in the same way as a rear ejection unit.

Lifting lever for the cutting unit

The lift lever is used to set the cutting unit in transport or
mowing position.
If the lever is pulled backwards the unit is raised and the
blades automatically stop rotating (transport position).
If the lock button is pressed in and the lever is moved forwards
the unit will be lowered and the blades will automatically start
to rotate (mowing position).
The lever can also be used to temporarily regulate the cutting
height, e.g. for a small mound in the lawn.
WARNING! Make sure that branches do not
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.