Table of Contents
Advertisement
Presentation
Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years.
FR 2218 FA2 4X4 is equipped with all wheel drive.
The power transmission from the engine is handled by a
hydrostatic transmission, which allows variable variation of
the speed by using the pedals.
Throttle trigger
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
To increase or reduce the engine speed the control is moved
forwards or backwards.
Choke control
The choke lever is used for cold starting and to give the
engine a richer fuel mixture.
For cold starting the lever is moved backwards to its end
position.
Speed limiter
The speed of the machine is steplessly regulated with two
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
WARNING! Make sure that branches do not
!
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
PRESENTATION
Parking brake
The parking brake is applied as follows:
1 Press down the parking brake pedal.
2 Press in the lock button on the steering column.
3 Release the parking brake pedal while keeping the button
pressed in.
The parking brake lock disengages automatically when the
brake pedal is pressed.
Cutting unit
FR 2218FA2 and FR 2218FA2 4x4 can be equipped with two
different cutting units.
•
JC 103
•
JC 112
The Combi-unit, equipped with a Mulching-plug, finely chops
the cuttings to fertiliser. Without the Mulching-plug the unit
works in the same way as a rear ejection unit.
Lifting lever for the cutting unit
The lift lever is used to set the cutting unit in transport or
mowing position.
If the lever is pulled backwards the unit is raised and the
blades automatically stop rotating (transport position).
– 13
English
Advertisement
Table of Contents
