Remote Transmitter - Ultra Start 12xx Series Install Manual

REMOTE VEHICLE STARTER
Remote Transmitter Learn
IMPORTANT! All remote transmitters not programmed at this time
will be erased from memory for security.
STEP 1 - Within 3 seconds turn the ignition key to the "ON"
position three times leaving "ON" the third time.
STEP 2 - Press and hold the Program Button. The park
lights will turn "ON" and the horn (optional) will
honk once. Continue to hold the Program
Button, the park lights will turn "OFF" and the
horn (optional) will honk 5 times quickly.
NOTE: If the parking lights do not turn "ON", release the Program Button and
turn the ignition to the "OFF" position, wait 5sec and repeat steps 1 & 2.
STEP 3a (Default) - While holding the Program Button, press and
STEP 3b (PadLoc/ - While holding the Program Button, press and
2nd Car)* release the
PadLoc is a safety feature that "LOCKS" the remote transmitter. To
"UNLOCK" the remote transmitter the
pressed simultaneously with the function chosen.
2nd Car function allows the operation of two Ultra Start systems
(in two separate vehicles) with one remote transmitter.
Example: Press and release
NOTE: Some features not available with PadLoc or 2nd car mode.
release the
transmitters to be programmed.
transmitters to be programmed.
or
and
button on each of the remote
button on each of the remote
simultaneously to remote start.
INSTALL MANUAL
PAGE 21
button must be