Remote Transmitter - Ultra Start 35 Series Install Manual

2-way remote starters

Hide thumbs Also See for 35 Series:

Table of Contents

REMOTE VEHICLE STARTER

Remote Transmitter Learn

STEP 1 - Within 3 seconds turn the ignition key to the "ON"

position three times leaving "ON" the third time.

STEP 2 - Press and hold the Program Button. The park

lights will turn "ON" and the horn (optional) will

honk once. Continue to hold the Program

Button, the park lights will turn "OFF" and the

horn (optional) will honk 5 times quickly.

NOTE:

If the parking lights do not turn "ON", release the Program Button and

turn the ignition to the "OFF" position, wait 5sec and repeat steps 1 & 2.

STEP 3 - While holding the Program Button, press and release the

button (1 on the three button transmitter) on each of the

remote transmitters to be programmed.

INSTALL MANUAL

PAGE 21

Table of Contents