REMOTE VEHICLE STARTER
Components
- Control module
- Antenna with built in
Program Button and LEDs
- 3 pin keyless entry harness
- Hood pin switch
- Install & Owner guides
Feature List
- Auto Tach (Tachless, TL series only) learning with Quick Learn
- Run Time: 4/15/45 minutes
- Door locks: .125s/.75s/3s / Double unlock / Ignition lock/unlock
- Horn output 5ms/10ms/50ms
- Timer or Cold Start (LT series) with 4 different start intervals
- Programmable Wait to Start or (+/-) diesel Glow plug input
- Ground While Running/Anti-grind protection/Starter kill
- System Override Protection/Service Mode (Valet)
- Park light and LED diagnostics
- PadLoc (remote transmitter "LOCK"
- Dual car operation
- Panic mode
- Engine Idle mode
Please read manual thoroughly.
If the vehicle is a MANUAL TRANSMISSION, a "M" series
remote starter must be installed. Any model number followed
by the letter "M" is specially designed for MANUAL
TRANSMISSION vehicles. The "M" series remote starter will
not work in an AUTOMATIC TRANSMISSION vehicle.
- 4 button remote transmitter's
- 6 pin Main harness
- 14 pin auxiliary harness
- 2 pin auxiliary harness*
- 3 pin auxiliary harness*
*13xx series models only
- up to 4 different transmitter codes
- Car Finder mode
- Turbo Timer mode
INSTALL MANUAL
PAGE 3