Ultra Start 12xx Series Install Manual page 19

Advanced remote starters
Table of Contents

Advertisement

REMOTE VEHICLE STARTER
Menu 3- Starter Settings
Setting 4 Run Time
1) 4 Minutes
2) 45 Minutes
*3) 15 Minutes
Press & Release the Program Button 4 Times (Setting 4) Confirmed with 4 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 5 Maximum Crank Time
1) 10 Seconds
2)
3 Seconds
*3) 5 Seconds
Press & Release the Program Button 5 Times (Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 6 Anti-Grind/Starter Kill
1) Active
1 Flash/Honk
2) Passive 2 Flashes/Honks (-)When locked/ 30 seconds after ignition is OFF or
*3) GWR
3 Flashes/Honks (-) Output during remote start only. (Anti-grind/ Bypass)
Press & Release the Program Button 6 Times (Setting 6) Confirmed with 6 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 7 Safety Start
1) Safety On
1 Flash/Honk
*2) Safety Off 2 Flashes/Honks
Press & Release the Program Button 7 Times (Setting 7) Confirmed with 4 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
1 Flash/Honk
2 Flashes/Honks
3 Flashes/Honks
1 Flash/Honk
2 Flashes/Honks
3 Flashes/Honks
(-)When locked and during remote start (Anti-Grind).
Press the
- continued
Runs for approx. 4 minutes when activated.
Runs for approx. 45 minutes when activated.
Runs for approx. 15 minutes when activated.
10 sec max time that the starter will stay engaged.
3 sec max time that the starter will stay engaged.
5 sec max time that the starter will stay engaged.
(Auxiliary Connector Pin 4)
button twice within 3seconds to remote start.
Press the
button once to remote start vehicle.
INSTALL MANUAL
PAGE 19
pressed

Advertisement

Table of Contents
loading

This manual is also suitable for:

13xx series12 series13 series

Table of Contents