Remote Transmitter Learn - Ultra Start 32 series Owner's Manual

REMOTE VEHICLE STARTER

Remote Transmitter Learn

IMPORTANT! All remote transmitters not programmed at this time
will be erased from memory for security.
STEP 1 - Within 3 seconds turn the ignition key to the "ON"
position three times leaving "ON" the third time.
STEP 2 - Press and hold the Program Button. The park
lights will turn "ON" and the horn (optional) will
honk once. Continue to hold the Program
Button, the park lights will turn "OFF" and the
horn (optional) will honk 5 times quickly.
NOTE: If the parking lights do not turn "ON", release the Program Button and
turn the ignition to the "OFF" position, wait 5sec and repeat steps 1 & 2.
STEP 3 - While holding the Program Button, press and release the
button on each of the remote transmitters to be programmed.
OWNER'S MANUAL
PAGE 11