Ultra Start 12xx Series Install Manual page 9

REMOTE VEHICLE STARTER
Wiring Descriptions
Pin
9-GREEN/
WHITE
10-GREEN
11-BLACK
12-PINK
13-BLUE/
WHITE
14-BLUE
LOCK/ UNLOCK CONNECTOR (3pin red)
Pin
1-GREEN
2-RED
3-BLUE
ANTENNA CONNECTOR (4pin Blue)
TEMP SENSOR or INSTANT START CONNECTOR (2pin white)*
Connector for Instant Start or Temperature Sensor inputs.
AUXILIARY CONNECTOR (3pin white)*
Pin
1-WHITE/
VIOLET
2-BLACK
3-RED
Function
Hood Pin(-)
Door Pin(-)
Ground(-)
-
Brake Light (+)
Tach(A/C)
-
Diesel(+/-)
Function
Lock(-)
-
Programmable LOCK output. (Menu 1)
12volts
-
250ma 12volt output for relays.
Unlock(-)
-
RF Antenna with Program Button and LEDs
Function
Ground While Running(-)
Ground(-)
-
12volts(+)
-
Description
-
Input to detect ground when hood is open.
MUST BE CONNECTED.
-
Input to detect (-) when door is open. ("M" series)
System chassis ground input.
-
Positive brake light switch input. Used to detect
the brake switch being applied.
A/C Tach signal input. Used to detect engine speed to
indicate vehicle is running. (Optional on "TL" models)
(Coil, Injector, cam/crank position sensors)
-
Programmable Wait to Start Input. Detects 12v or
negative signals. (Menu 3)
Description
Programmable UNLOCK output. (Menu 1)
250ma ground output.
250ma 12volt output.
INSTALL MANUAL
Description
-
250ma ground output while
remote starter is active.
*13xx Series Only
PAGE 9