Route Info; Wlan Station List; Figure 22 Status > Route Info; Table 6 Status > Route Info - ZyXEL Communications P-870HW-51a v2 User Manual

4.1.2 Route Info

Routing is based on the destination address only and the ZyXEL Device takes the shortest path
to forward a packet. Click Status > Route Info to access this screen. Use this screen to view
the internal routing table on the ZyXEL Device.
Figure 22 Status > Route Info
The following table describes the labels in this screen.
Table 6 Status > Route Info
LABEL
Destination
Gateway
Subnet Mask
Flag
Metric
Service
Interface

4.1.3 WLAN Station List

Click Status > WLAN Station List to access this screen. Use this screen to view the wireless
stations that are currently associated to the ZyXEL Device.
P-870HW-51a v2 User's Guide
DESCRIPTION
This indicates the destination IP address of this route.
This indicates the IP address of the gateway that helps forward this route's traffic.
This indicates the destination subnet mask of this route.
This indicates the route status.
Up: The route is up.
Reject: The route is blocked and will force a route lookup to fail.
Gateway: The route uses a gateway to forward traffic.
Host: The target of the route is a host.
Reinstate: The route is reinstated for dynamic routing.
Dynamic (redirect): The route is dynamically installed by a routing daemon or redirect
Modified (redirect): The route is modified from a routing daemon or rederict.
The metric represents the "cost of transmission". A router determines the best route
for transmission by choosing a path with the lowest "cost". The smaller the number,
the lower the "cost".
This indicates the name of the service used to forward the route.
This indicates the name of the interface through which the route is forwarded.
Chapter 4 Status Screens
47