9000Xdt - Invacare 9000 SL Owner's Operator And Maintenance Manual

3. Install the two hex screws and locknuts that secure the amputee bracket to the
wheelchair.
4. Install the rear wheels onto the wheelchair. Refer to Removing/Installing Rear Wheels
on page 47.
Bracket "A"
Adult Right
Axle Spacer Toward
Outside of Wheelchair
Hemi Left
FIGURE 11.4 Installing Amputee Bracket - 9000SL/XT

9000XDT

NOTE: For this procedure, refer to FIGURE 11.5.
1. Refer to the following chart or FIGURE 11.5 to determine the mounting position of the
amputee bracket:
SEAT-TO- *BRACKET
FLOOR
TALL A
TALL B
ADULT B
ADULT A
HEMI B
HEMI A
*NOTE: ʺAʺ and ʺBʺ are stamped on the sides of the amputee bracket.
Part No.1056953
Left
Rear View of
Amputee Bracket
Hex Screws
AXLE SPACER SIDE OF
POSITION (ON WHEEL-
BRACKET)
DOWN
DOWN
UP
UP
UP
UP
73
SECTION 11—OPTIONS
Locknuts
Right
Axle Spacer Toward
Outside of Wheelchair
AXLE MOUNTING POSITION
(ON WHEELCHAIR)
CHAIR
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
Bracket "B"
Adult Left
Hemi Right
MIDDLE
MIDDLE
BOTTOM
BOTTOM
MIDDLE
MIDDLE
9000 Series