SECTION 11—OPTIONS
2. Install the amputee bracket on the wheelchair frame to the position determined in
STEP 1.
NOTE: Make sure the axle spacer is pointing towards the outside of the wheelchair.
3. Install the two (2) hex screws and locknuts that secure the amputee bracket to the
wheelchair.
4. Install the rear wheels onto the wheelchair. Refer to Removing/Installing Rear Wheels
on page 47.
Bracket "A"
Adult Left
FIGURE 11.5 Installing Amputee Bracket - 9000XDT
9000 Series
Hemi Left
Hemi Right
Left
Axle Spacer Toward
Outside of Wheelchair
Rear View of
Amputee Bracket
Tall Right
Locknuts
74
Bracket "B"
Right
Adult Right
Hex Screws
Tall Left
Part No.1056953