Inspect/Adjust Weekly; Inspect/Adjust Monthly - Invacare 9000 SL Owner's Operator And Maintenance Manual

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
❑ Ensure all spokes are uniformly tight.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
❑ Inspect casters for cracks and wear.
❑ Inspect front casters for cracked, bent or broken spokes.
❑ Clean upholstery and armrests.

Inspect/Adjust Weekly

❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑ Inspect tires for flat spots and wear.
❑ Check pneumatic tires for proper inflation.
❑ If equipped, check that quick-release axles lock properly. Lubricate if necessary.
❑ Inspect rear wheels for cracked, bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
❑ Inspect front caster for cracked, bent or broken spokes.

Inspect/Adjust Monthly

❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Check that the wheel locks do not interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Inspect seat and back for loose or broken hardware.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Inspect back cane hand grips for wear/looseness/deterioration.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
9000 Series
30
Part No.1056953