Reaching, Leaning And Bending Forward; Reaching, Leaning Backwards; Tipping - Invacare 9000 SL Owner's Operator And Maintenance Manual

Reaching, Leaning and Bending Forward

WARNING
DO NOT attempt to reach objects if
you have to move forward in the seat or
pick them up from the floor by reaching
down between your knees.
NOTE: For this procedure, refer to
FIGURE 2.1.
Position the front casters so that they are
extended as far forward as possible and
engage wheel locks.

Reaching, Leaning Backwards

WARNING
DO NOT lean over the top of the back
upholstery to reach objects behind you,
as this may cause the wheelchair to tip
over.
NOTE: For this procedure, refer to
FIGURE 2.2.
Position wheelchair as close as possible to
the desired object. Point front casters
forward to create the longest possible
wheelbase. Reach back only as far as your
arm will extend without changing your
sitting position.

Tipping

DO NOT tip the wheelchair without assistance.
When tipping the wheelchair, an assistant should grasp the back of the wheelchair on a
non-removable (non-detachable) part. Inform the wheelchair occupant before tipping the
wheelchair and remind him/her to lean back. Be sure the occupant's feet and hands are
clear of all wheels and/or pinch points.
Part No.1056953
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
FIGURE 2.1 Reaching, Leaning and Bending
FIGURE 2.2 Reaching, Leaning Backwards
WARNING
23
Forward
9000 Series