Stability - All Models; Stability - Recliner Models Only - Invacare 9000 SL Owner's Operator And Maintenance Manual

Invacare 9000 series wheelchairs owner’s operator and maintenance manual
Hide thumbs Also See for 9000 SL:
Table of Contents

Advertisement

Stability - All Models

The seat depth, back height/angle, seat angle, size/position of the front casters,
size/position of the rear wheels, anti-tipper model, as well as the user condition directly
relate to the stability of the wheelchair. Any change to one or any combination of the ten
may cause the wheelchair to decrease in stability. These adjustments MUST be performed
by a qualified technician.
NOTE: When changes to
the left hand column occur,
follow across the chart and
refer to the X procedure to
maintain the proper
stability, safety and
handling of the wheelchair.
BACK HEIGHT
SEAT DEPTH
BACK ANGLE
SEATING SYSTEM
TILT ANGLE
CASTER SIZE
CASTER POSITION
WHEEL SIZE
WHEEL POSITION
USER CONDITION
SEAT HEIGHT
The various seat-to-floor heights require specific settings depending on rear wheel size,
rear wheel position, front caster size/position and desired seat-to-floor angle. These
adjustments MUST be performed by a qualified technician.

Stability - Recliner Models Only

ALWAYS use anti-tippers. When outdoors on wet, soft ground or on gravel surfaces,
anti-tippers may not provide the same level of protection against tipover. Extra caution
must be observed when traversing such surfaces.
ALWAYS make sure that the wheelchair is stable before using the recliner option.
Ensure the spreader bar is attached and secured before using the 9000XT Recliner.
ALWAYS return the back to the upright position before lifting the wheelchair.
LIFT KIT MODELS ONLY - Both spring lift mechanisms MUST be operational before
using the recliner. DO NOT operate the recliner option if only one of the spring lift
mechanisms is operational.
LIFT KIT MODELS ONLY - DO NOT attempt to recline or incline the wheelchair back
without occupant. Back will raise abruptly and cause injury. Keep clear when reclining or
inclining chair back to avoid injury.
Part No.1056953
X
X
X
X
X
X
X
X
X
X
X
X
N/A N/A
X
N/A
X
N/A
X
N/A N/A
X
N/A
X
N/A N/A
X
N/A
X
N/A N/A
X
N/A
X
N/A N/A
X
X
X
X
X
N/A
X
X
17
SECTION 1—GENERAL GUIDELINES
X
X
X
X
N/A
X
X
X
X
X
X
X
X
X
X
X
N/A N/A N/A N/A N/A N/A N/A
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
N/A N/A N/A
X
N/A N/A N/A
X
N/A N/A N/A
X
X
N/A N/A
X
N/A
X
X
X
N/A
X
X
X
N/A
X
X
N/A
X
X
X
N/A N/A
X
N/A
X
X
9000 Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000xt recliner9000 xdt

Table of Contents