Introduction To The Srx5600 Services Gateway; Srx5600 Services Gateway Description - Juniper SRX5600 Hardware Manual

CHAPTER 1
Introduction to the SRX5600 Services
Gateway

SRX5600 Services Gateway Description

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
SRX5600 Services Gateway Description on page 3
SRX5600 Services Gateway Physical Specifications on page 4
SRX5600 Services Gateway Component Redundancy on page 5
The SRX5600 Services Gateway is a high-performance, highly scalable, carrier-class
security device with multi-processor architecture.
The SRX5600 Services Gateway is 8 rack units (U) tall. Three of these devices can be
stacked in a single floor-to-ceiling rack, for increased port density per unit of floor space.
The services gateway provides six slots that you can populate with two Switch Control
Boards (SCBs) and up to four additional cards of the following types:
Services Processing Cards (SPCs) provide the processing capacity to run integrated
services such as firewall, IPsec, and IDP.
Modular PIC Concentrators (MPCs) provide Ethernet interfaces that connect the
services gateway to your network.
I/O cards (IOCs) provide Ethernet interfaces that connect the services gateway to your
network.
Flex IOCs are similar to IOCs, but have slots for port modules that allow you greater
flexibility in adding different types of Ethernet ports to your services gateway.
SRX5600 Services Gateway Physical Specifications on page 4
SRX5600 Services Gateway Chassis on page 7
SRX5600 Services Gateway Card Cage and Slots on page 10
SRX5600 Services Gateway Component Redundancy on page 5
3