Changing the microswitch for the condensed
water pump
1. Remove the rear panel in accordance with the
section
"Rear panel -
2. Remove the wiring and the microswitch.
3. Fit the new microswitch.
4. Install the rear panel in accordance with the
section
"Rear panel -
Changing the foam rubber seal
1. Remove the rear panel in accordance with the
section
"Rear panel -
2. Change the seal.
3. Install the rear panel in accordance with the
section
"Rear panel -
removing...".
installation...".
removing...".
installation...".
2
SERVICE
2
67