Change Settings; Language; Locking A Programme; Child Lock On Button - Asko TDC33 Service Manual

CHANGE SETTINGS

LANGUAGE

You can change the language of the displayed text.
The languages you can choose from are Dansk,
Deutsch, English, Espanol, Français, Italiano,
Nederlands, Norsk, Portugués, Suomi and Svens-
ka.
Earlier models had two versions of the machi-
ne (Alternatives 1 and 2) but now all eleven langua-
ges are present in all machines.
Alternative 1: The languages you can choose
from are Danish, Finnish, French, Dutch, Nor-
wegian and Swedish.
Alternative 2: The languages you can choose
from are English, French, Italian, Portuguese, Spa-
nish and German.
To change language do as follows:
Switch off the power switch,
on again so that the machine is in start-up mode.
Press the button five times, then press the
P8
button five times. You have to complete the-
P1
se ten button presses within fifteen seconds.
Within three seconds of pressing the
ton for the fifth time you should then select the
language you want by pressing the
tons.

LOCKING A PROGRAMME

If for some reason you want to limit the number
of programmes that can be used you can lock one
or more programmes.
No characters or digits are shown on the dis-
play when a locked programme is selected.
To lock or unlock a programme, do as fol-
lows:
Switch off the power switch,
on again so that the machine is in start-up mode.
Press the -button five times, then press the
P8
-button five times. You have to complete the-
P7
se ten button presses within fifteen seconds.
Within three seconds of pressing the
ton for the fifth time you should hold in the pro-
gramme button for the programme you want to
lock for 5-10 seconds until the information in
the display starts flashing.
Then you can lock the programme by relea-
sing the programme button and pressing the
button once.
Do the same to unlock the programme.
CHILD LOCK ON
To prevent accidental button pushes on the
button you can activate the child lock function.
The
seconds to activate the machine.
To switch the child lock on or off, do as
follows:
Switch off the power switch,
on again so that the machine is in start-up mode.
se ten button presses within fifteen seconds.
ton for the last time you must then press the
or
child lock on or off.
, then switch it
To start a program with locked
Press the
but-
P1
machine will start.
or but-
P6 P7
, then switch it
-but-
P7
-
button then must be held in for three
Press the button five times, then press the
P8
button five times. You have to complete the-
P3
Within three seconds of pressing the
button to choose whether you want the
P7
Press to activate the child lock.
P7
Press to disable the child lock.
P6
button for three seconds and the
Start
CHANGE SETTINGS
BUTTON
, then switch it
but-
P3
P6
button.
Start
73