Front Door; Removing The Front Door; Installing The Front Door; Changing The Hinge Pin - Asko TDC33 Service Manual

FRONT DOOR

Removing the front door

NOTE
The front door must remain closed during the
entire removal procedure; the door magnet will
hold it in place.
2. Unscrew and remove the 3 screws that secure
the hinge fixture.
3. Lift down the front door.

Installing the front door

4. Offer up the front door against the hinge sock-
et in the panel.
5. Close the front door so that the door magnet
holds it in place.
6. Put the hinge pin into its socket.
7. Tighten the 3 screws that secure the hinge fix-
ture.
8. Install the bottom cover

Changing the hinge pin

1. Remove the front door.
2. Unscrew the hinge pin.
NOTE
The illustration shows the lower hinge fixture.
The hinge pin is installed in a similar manner in
the upper hinge fixture.
3. Install the hinge pin.
4. Install front door.
2
2
3
2
SERVICE
53