Care And Cleaning; Cleaning The Lint Filter; Emptying The Condensed Water Container - Asko T884XLHP Operating Instructions Manual

CARE AND CLEANING

CLEANING THE LINT FILTER

The lint filter must be cleaned after each load.
1. Lift the filter from the holder in the door.
2. Lift the filter from the holder in the door. Open the
lint filter. Use your thumb to press on the edge as
illustrated and pull it out.
3. Use your hand or a soft cloth to remove the lint
from all sides of the filter. If necessary, use a damp
sponge and a small amount of washing-up liquid to
remove any deposits. Dry the filter thoroughly with a
towel.
4. Close the lint filter and put it back in the door.Close
the lint filter before closing the door.
14
EMPTYING THE CONDENSED WATER
CONTAINER
If you have not connected the machine to a separate
drain the condensed water container must be emptied
after each load. Remove the condensed water container,
empty out the water and replace the container.
If the condensed water container becomes full to overfl
owing, the program is interrupted and "Over Flow"
appears on the display. Empty the container and press
the Start button to restart the program.
For connection to a separate drain, see the installation
instructions in the set of documents.