Front Panel; Removing Front Panel; Installing Front Panel - Asko TDC33 Service Manual

SERVICE

FRONT PANEL

Removing front panel

1. Remove the three screws at the rear edge and
lift off the top cover.
2. Remove the three screws that secure the lo-
wer hinge and twist it free, lift off the front
door.
3. Unscrew the 4 screws that secure the front fra-
me to the front panel.
4. Unscrew the 4 screws that secure front panel
to the side panels.
5. Unscrew the 2 screws that secure the bottom
edge of the front panel.
6. Lift off the front panel.

Installing front panel

7. Put the front panel into position.
8. Secure the 4 screws from the inside in the side
panels.
9. Put the front door back on, keep it in posi-
tion with the aid of the door magnet, and se-
cure the hinge.
.
10. Secure the 2 screws that secure front panel at
the bottom edge.
IMPORTANT
Don't forget the 2 star washers.
11. Secure the 4 screws that secure the front fra-
me to the front panel.
12. Fit the top cover.
58
4
6
5