Size Mismatch - Brother HL-5440D Service Manual

Error code 9000

Size Mismatch

When printing from the MP tray, the size of paper set in the MP tray does not match the size
specified by the driver.
Error code 9100
Size Mismatch
When printing from paper tray 1, the size of paper set in paper tray 1 does not match the size
specified by the driver.
Error code 9200
Size Mismatch
When printing from paper tray 2, the size of paper set in paper tray 2 does not match the size
specified by the driver.
<User Check>
• Match the size of the paper set in each tray to the driver instruction, or match the driver
instruction to the size of the paper set in each tray.
Step
Registration rear actuator
1 caught in some sections of the
machine
Registration rear sensor failure
2
3 Main PCB failure
Error code 9300
No Paper
When printing from the MP tray, the MP paper empty sensor detected that there was no
paper set in the MP tray.
<User Check>
• Set the paper in the MP tray.
Step
MP paper empty actuator 1 or 2
1 caught in some sections of the
machine
MP paper empty actuator 1 or 2
2
failure
MP paper empty sensor failure
3
High-voltage power supply PCB
4
failure
5 Main PCB failure
Cause
Reattach the registration rear actuator.
Replace the registration front/rear sensor PCB
ASSY.
Replace the main PCB ASSY.
Cause
Reattach the MP paper empty actuator 1 or 2.
Replace the MP paper empty actuator 1 or 2.
Refer to
(function code: 32)" in Chapter 5
sensor operation. If the sensor operation is
faulty, replace the MP paper empty sensor
PCB ASSY.
Replace the high-voltage power supply PCB
ASSY.
Replace the main PCB ASSY.
2-45
Remedy
Remedy
"1.3.8 Check sensor operation
to check the
Confidential