Duplex Solenoid - Brother HL-5440D Service Manual

9.31 Duplex solenoid

(1) Remove the eject idle gear 20 from the main frame L ASSY.
(2) Remove the eject switch arm spring from the main frame L ASSY.
(3) Remove the eject switch arm from the main frame L ASSY.
(4) Remove the eject sector gear spring from the main frame L ASSY.
(5) Remove the eject sector gear from the main frame L ASSY.
(6) Remove the taptite bind B M3x10 screw, and remove the duplex solenoid and the duplex
solenoid lever from the main frame L ASSY. Then remove the duplex solenoid lever from
the duplex solenoid.
(7) Remove the duplex solenoid spring from the duplex solenoid.
Duplex solenoid
Duplex solenoid spring
Eject sector gear spring
Eject switch arm spring
A
Assembling Note:
• When attaching the eject sector gear spring and the duplex solenoid spring, pay
attention to the direction, referring to the illustration above.
Taptite bind B M3x10
Duplex solenoid lever
Duplex solenoid spring
Eject sector
gear spring
Fig. 3-60
3-59
Eject idle gear 20
A
Eject sector gear spring
Eject switch arm
Eject sector gear
Main frame L ASSY
Eject sector
gear
Boss
Confidential