Short Paper; Size Mismatch - Brother HL-4140CN Service Manual

Error message
Replace Toner
Replace WT Box
Self-Diagnostic

Short paper

Size Error
Size Error DX

Size Mismatch

Small paper
Toner Error
Tray 2 Error
Unable to Update
Unusable Device
Unusable File
Description
Each toner cartridge reached the end of life.
The color toner reached the end of life during
printing.
Waste toner box full. (The sensor detected that
the waste toner became full.)
Fuser unit error.
(After the error code 58 occurred, a failure in
the fuser unit is detected again upon start-up.)
It was detected that the length of the paper
under printing was less than the specified
value.
A paper size, which is not supported by the
paper tray 1, is specified in the paper size of
the data.
A paper size, which is not supported by the
paper tray 2, is specified in the paper size of
the data.
Unsupported paper size is used for duplex
printing.
The tray in which unsupported paper size is
loaded is selected for duplex printing.
The paper size of the MP tray does not match
that of the print setting.
The paper size of the paper tray 1 does not
match that of the print setting.
The paper size of the paper tray 2 does not
match that of the print setting.
It was detected that the size of the paper was
less than the specified value.
Pressure engagement/disengagement failure
of toner cartridge.
Paper tray 2 pressing plate up/down error.
Execution of the program update cannot be
started because other function is being
executed.
USB device overcurrent error.
Unsupported device
The update process cannot be continued
because the data of the program file is
incorrect.
2-19
Error Refer
codes to:
60 2-44
61
62
63
74 2-49
CF 2-75
59 2-41
5B 2-42
97 2-65
98 2-65
89 2-59
99 2-65
90 2-63
91 2-63
92 2-63
5C 2-42
C6 2-72
C4 2-71
---
CA 2-73
---
---
Confidential