Brother HL-5440D Service Manual page 285

Adjust left-end print start position on second side when duplex printing (LCD
model only)
<Function>
In the event that the left-end print start position deviates on the second side when duplex
printing, use this function to adjust the position left and right.
The adjustable range is -100 to 750 (unit: 300 dpi). (Shifted to left when the value is negative)
<Operation Procedure>
(1) While the machine is in the ready state, press the [Go] and [
"USBNo." is displayed on the LCD.
(2) Press the [ ] or [
(3) Press the [OK] button. "DX.XAdjust=**" is displayed on the LCD.
(The value currently set is displayed for **.)
(4) To shift the writing start position to the left, press the [
To shift the position to the right, press the [
(5) Press the [OK] button. "Accepted" is displayed on the LCD, and the machine returns to
the ready state.
Change ON/OFF setting for Deep Sleep function when Deep Sleep function is
enabled and machine has Storage Data (Secure) (LCD model only)
<Function>
When the machine has the Storage Data (Secure) available, use this function to set whether
to permit the machine to enter Deep Sleep mode. This function is effective when the Deep
Sleep function is enabled (ON).
LCD
DpSlp.StrDt = ON
DpSlp.StrDt = OFF
The setting currently selected is marked "*" at the end of the display.
<Operation Procedure>
(1) While the machine is in the ready state, press the [Go] and [
"USBNo." is displayed on the LCD.
(2) Press the [ ] or [
(3) Press the [OK] button. "DpSlp.StrDt=ON" is displayed on the LCD.
(4) Display "DpSlp.StrDt=ON" on the LCD when permitting the machine to enter Deep Sleep
mode, or "DpSlp.StrDt=OFF" when not permitting it.
(5) Press the [OK] button. "Accepted" is displayed on the LCD, and the machine returns to
the ready state.
] button to display "DX.XAdjust" on the LCD.
The Deep Sleep function is activated even when the machine
has Storage Data (Secure) available. (Default)
The Deep Sleep function is not activated when the machine
has Storage Data (Secure) available.
] button to display "DpSlp.StrDt" on the LCD.
5-60
] buttons simultaneously.
] button to decrease the value.
] button to increase the value.
Description
] buttons simultaneously.
Confidential