Fuser Unit - Brother HL-5440D Service Manual

(5) Push the two knobs on the fuser cover, and pull the fuser cover down in the direction of
the arrow.
(6) Remove the fuser cover from the bosses on the fuser unit, and remove the fuser cover
from the machine.

Fuser unit

Boss
(7) Remove the taptite bind B M4x12 screw, and release the hook to remove the fuser unit
line cover R from the machine.
(8) Remove the rear nip release link from the machine.
Note:
• Make sure that the front cover is open when removing the rear nip release link.
(9) Remove the taptite pan B M4x14 screw, and release the hook to remove the fuser unit
line cover L from the machine.
Fuser unit line cover L
Fig. 7-4
Fuser unit line cover R
Taptite bind B M4x12
Hook
Hook
Taptite pan B M4x14
Fig. 7-5
7-4
Boss
Fuser cover
Knob
Knob
Rear nip release link
Confidential