Continuous Print Test (Function Code: 67) - Brother HL-5440D Service Manual

1.3.12 Continuous print test (function code: 67)

<Function>
This function is to conduct paper feed and eject tests while printing patterns.
<Operation Procedure>
(1) Press the [
"Maintenance 67" on the LCD.
(2) Press the [OK] button. "SELECT: K 100%" is displayed on the LCD.
(3) Refer to the table below (print pattern), and press the [
print pattern.
(4) Press the [OK] button. "SELECT: A4" is displayed on the LCD.
(5) Refer to the table below (paper size), and press the [
paper size.
(6) Press the [OK] button. "SELECT: TRAY1" is displayed on the LCD.
(7) Refer to the table below (print type), and press the [
type.
(8) Press the [OK] button. "PAPER FEED TEST" is displayed on the LCD, and printing test
pattern starts using the selected conditions.
(9) When the [Cancel] button is pressed, test pattern printing is stopped, and the machine
returns to the initial state of maintenance mode.
Print pattern
SELECT: K 100%
SELECT: K 1%
SELECT: K 5%
SELECT: Lattice
Paper size
SELECT: A4
SELECT: LETTER
Print type
SELECT: TRAY1
SELECT: TRAY2
SELECT: MP
SELECT: TRAY1 DX
SELECT: TRAY2 DX
SELECT: MP DX
Note:
• Duplex printing only supports 5% intermittent pattern printing. Single-side printing
applies to other patterns even when duplex printing is specified.
] or [ ] button in the initial state of maintenance mode to display
LCD
100% solid printing (continuous printing)
1% intermittent pattern printing (500-page printing)
5% intermittent pattern printing (500-page printing)
Lattice printing (continuous printing)
LCD
A4
Letter
LCD
Single-side printing from paper tray 1
Single-side printing from paper tray 2
Single-side printing from MP tray
Duplex printing from paper tray 1
Duplex printing from paper tray 2
Duplex printing from MP tray
] or [
] or [
] or [
Description
Description
Description
5-20
] button to select the
] button to select the
] button to select the print
Confidential