Brother HL-5440D Service Manual page 152

(7) Remove the taptite pan B M4x14 screw, and remove the fuser unit from the machine.
Note:
• Make sure that the front cover is closed when removing the fuser unit.
Assembling Note:
• Check that the heater harness is housed in frame L as shown in the illustration below.
Otherwise the harness may be caught in some sections of the machine, and may catch
fire.
Heater harness
Taptite pan B M4x14
Fig. 3-32
Heater harness is
housed in frame L.
Fig. 3-33
3-33
Fuser unit
Confidential