Mp Solenoid - Brother HL-5440D Service Manual

9.27 MP solenoid

(1) Remove the MP drive gear 18 from the main frame L ASSY.
(2) Release the MP solenoid harness from the securing fixtures.
(3) Remove the taptite bind B M3x10 screw, and remove the MP solenoid and the MP
solenoid lever from the main frame L ASSY.
(4) Remove the MP solenoid lever and the MP solenoid spring from the MP solenoid.
MP drive gear 18
Harness routing: Refer to
MP solenoid
Fig. 3-55
"2.Relay front PCB ASSY".
3-54
MP solenoid spring
MP solenoid harness
MP solenoid lever
Taptite bind B M3x10
Main frame L ASSY
Confidential