List Of Maintenance Mode Functions - Brother HL-5440D Service Manual

1.2

List of Maintenance Mode Functions

1.2.1 List of maintenance mode functions for LCD models
Function
code
01 Initialize EEPROM parameters
09 Print test pattern
10 Set worker switches (WSW)
11 Print worker switch (WSW) setting data
12 Check LCD operation
13 Check control panel button operation
25 Display software version
28 Set One Push Demo function
32 Check sensor operation
33 Display LAN connection status
40 Print Dump List
Change USB No. return value / Adjust left-end print start
45 position on second side when duplex printing / Change
ON/OFF setting for Deep Sleep function
67 Continuous print test
69 Print frame pattern (single-side printing)
70 Print frame pattern (duplex printing)
71 Print solid pattern
74 Setting by country
77 Print maintenance information
78 Check fan operation
80 Display machine log information
82 Display machine error code
91 Initialize EEPROM parameters
99 Quit maintenance mode
The maintenance mode functions shaded in the table can be used by end users.
Function
5-3
Refer to:
1.3.1 (5-6)
1.3.2 (5-7)
1.3.3 [1] (5-8)
1.3.3 [2] (5-9)
1.3.4 (5-10)
1.3.5 (5-11)
1.3.6 (5-12)
1.3.7 (5-13)
1.3.8 (5-14)
1.3.9 (5-16)
1.3.10 (5-17)
1.3.11 (5-18)
1.3.12 (5-20)
1.3.13 (5-22)
1.3.14 (5-24)
1.3.15 (5-26)
1.3.16 (5-27)
1.3.17 (5-29)
1.3.18 (5-31)
1.3.19 (5-32)
1.3.20 (5-34)
1.3.1 (5-6)
1.3.21 (5-34)
Confidential