Brother HL-5440D Service Manual page 307

(6) Push the T2 lift arm in the direction of arrow 6a, and remove the boss on the T2 roller
holder ASSY from the T2 lift arm. Then turn the T2 roller holder ASSY in the direction of
arrow 6b.
T2 lift arm
(7) Slide the T2 roller holder ASSY in the direction of arrow 7 to remove it from the T2
separation roller shaft.
(8) Lift the right side of the T2 roller holder ASSY in the direction of arrow 8a, and pull the T2
roller holder ASSY in the direction of arrow 8b to remove it from the LT unit.
"A"
T2 feed frame ASSY
Assembling Note:
• When attaching the T2 roller holder ASSY, engage "A" on the shaft of the T2 roller
holder ASSY with the hole on the T2 feed frame ASSY, and insert the shaft into the
hole.
Boss
6a
6b
Fig. 7-22
T2 roller holder ASSY
8a
7
Fig. 7-23
7-16
T2 roller holder ASSY
8b
T2 separation roller shaft
LT unit
Confidential