Brother HL-5440D Service Manual page 204

(3) Remove the three taptite cup S M3x8 SR screws, and remove the T2 paper feed frame
unit from the LT unit. Then pull out the T2 paper feed sensor harness from the LT unit.
LT unit
Taptite cup S M3x8 SR
(4) Remove the two taptite bind B M4x12 screws, and remove the T2 front beam from the
T2 paper feed frame unit.
(5) Release the T2 paper feed sensor harness from the securing fixtures.
Taptite bind B M4x12
T2 front beam
T2 paper feed
sensor harness
Taptite cup S M3x8 SR
Fig. 3-90
T2 paper feed frame unit
Fig. 3-91
3-85
T2 paper feed frame unit
Confidential