Table of Contents
Advertisement
DMZ Host for WAN2 ~ WAN5 are slightly different with WAN1. See the following figure.
If you previously have set up WAN Alias for PPPoE or Static or Dynamic IP mode in
WAN2/WAN3/WAN4/WAN5 interface, you will find them in Aux. WAN IP for your
selection.
Enable
Private IP
Choose PC
Check to enable the DMZ Host function.
Enter the private IP address of the DMZ host, or click Choose
PC to select one.
Click this button and then a window will automatically pop up,
as depicted below. The window consists of a list of private IP
addresses of all hosts in your LAN network. Select one private
IP address in the list to be the DMZ host.
When you have selected one private IP from the above dialog,
the IP address will be shown on the following screen. Click OK
to save the setting.
57
Vigor3200 Series User's Guide
Advertisement
Table of Contents
