Table of Contents
Advertisement
When you check IPSec, you will see the following graphic:
Profile Name
User Name
Password
Pre-Shared Key
Confirm Pre-Shared Key Type the pre-shared key again for confirmation.
Digital Signature (X.509) Check the box of Digital Signature to invoke this
Peer IP/VPN Client IP
Peer ID
Remote Network IP
Remote Network Mask
Type a name for such profile. The length of the file is
limited to 10 characters.
This field is used to authenticate for connection when
you select PPTP or L2TP with or without IPSec policy
above.
This field is used to authenticate for connection when
you select PPTP or L2TP with or without IPSec policy
above.
For IPSec/L2TP IPSec authentication, you have to type a
pre-shared key.
function.
Use the drop down list to choose one of the certificates
for using. You have to configure one certificate at least
previously in Certificate Management >> Local
Certificate. Otherwise, the setting you choose here will
not be effective.
Type the WAN IP address or VPN client IP address for
the remote client.
Type the ID name for the remote client.
Please type one LAN IP address (according to the real
location of the remote host) for building VPN
connection.
Please type the network mask (according to the real
location of the remote host) for building VPN
connection.
199
Vigor3200 Series User's Guide
Advertisement
Table of Contents
