Table of Contents
Advertisement
Setup
WAN Connection
Detection
After finishing all the settings here, please click OK to activate them.
Vigor3200 Series User's Guide
the schedules can be set previously in Application >>Schedule
web page and you can use the number that you have set in that
web page.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference. TTL
value is set by telnet command.
100
Advertisement
Table of Contents
