Table of Contents
Advertisement
Settings in the remote host:
1.
For Win98/ME, you may use "Dial-up Networking" to create the PPTP tunnel to Vigor
router. For Win2000/XP, please use "Network and Dial-up connections" or "Smart VPN
Client", complimentary software to help you create PPTP, L2TP, and L2TP over IPSec
tunnel. You can find it in CD-ROM in the package or go to www.DrayTek.com
download center. Install as instructed.
2.
After successful installation, for the first time user, you should click on the Step 0.
Configure button. Reboot the host.
3.
In Step 2. Connect to VPN Server, click Insert button to add a new entry.
If an IPSec-based service is selected as shown below,
You may further specify the method you use to get IP, the security method, and
authentication method. If the Pre-Shared Key is selected, it should be consistent with the
one set in VPN router.
281
Vigor3200 Series User's Guide
Advertisement
Table of Contents
