Table of Contents
Advertisement
Physical Mode / Type
Line Speed
Active Mode
Backup WAN
Note: In default, each WAN is enabled.
F
o
r
W
A
F
o
r
W
A
WAN1 ~ WAN4 are fixed with physical mode of Giga Ethernet. Here we take WAN1 as an
example.
Enable
Display Name
Physical Mode
Physical type
Line Speed
Vigor3200 Series User's Guide
Display the physical mode and physical type of such WAN
interface.
Display the downstream and upstream rate of such WAN
interface.
Display whether such WAN interface is Active device or backup
device.
Display the Backup WAN interface for such WAN when it is
disabled.
N
1
~
W
A
N
4
N
1
~
W
A
N
4
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for WAN2 or choose Auto
negotiation for determined by the system.
If your choose According to Line Speed as the Load Balance
Mode, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps. The
32
Advertisement
Table of Contents
