Table of Contents
Advertisement
D
e
t
a
i
l
s
D
e
t
a
i
l
s
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static or Dynamic IP as the accessing protocol of the internet, please choose Static or
Dynamic IP mode from Internet Access menu. The following web page will be shown.
Static or Dynamic IP
Keep WAN Connection
WAN Connection
Detection
Vigor3200 Series User's Guide
P
a
g
e
f
o
r
S
t
a
t
i
c
o
r
P
a
g
e
f
o
r
S
t
a
t
i
c
o
r
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Normally, this function is designed for Dynamic IP
environments because some ISPs will drop connections if there
is no traffic within certain periods of time. Check Enable PING
to keep alive box to activate this function.
PING to the IP - If you enable the PING function, please
specify the IP address for the system to PING it for keeping
alive.
PING Interval - Enter the interval for the system to execute the
PING operation.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
D
y
n
a
m
i
c
I
P
i
n
W
A
D
y
n
a
m
i
c
I
P
i
n
W
A
94
N
1
~
W
A
N
4
N
1
~
W
A
N
4
Advertisement
Table of Contents
