Table of Contents
Advertisement
WAN Interface
Domain Name
Active
View Log
Force Update
3.
Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered hostname:
hostname and domain name suffix: dyndns.org in the Domain Name block. The
following two blocks should be typed your account Login Name: test and Password: test.
Enable Dynamic DNS
Account
WAN Interface
Service Provider
Service Type
Domain Name
Login Name
Password
Vigor3200 Series User's Guide
Display the WAN interface used.
Display the domain name that you set on the setting page
of DDNS setup.
Display if this account is active or inactive.
Display DDNS log status.
Force the router updates its information to DDNS server.
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
WAN1/WAN2/WAN3/WAN4/WAN5 First - While
connecting, the router will use WAN1/WAN2/WAN3
/WAN4 /WAN5 as the first channel for such account. If
WAN1/WAN2/WAN3/WAN4/WAN5 fails, the router
will use another WAN interface instead.
WAN1/WAN2/WAN3/WAN4/WAN5 Only - While
connecting, the router will use WAN1/WAN2/WAN3
/WAN4/WAN5 as the only channel for such account.
Select the service provider for the DDNS account.
Select a service type (Dynamic, Custom or Static). If you
choose Custom, you can modify the domain that is chosen
in the Domain Name field.
Type in one domain name that you applied previously.
Use the drop down list to choose the desired domain.
Type in the login name that you set for applying domain.
Type in the password that you set for applying domain.
182
Advertisement
Table of Contents
