Table of Contents
Advertisement
Pass – Only the log about Pass will be recorded in Syslog.
Block – Only the log about Block will be recorded in Syslog.
All – All the actions (Pass and Block) will be recorded in
Syslog.
URL Access Control
Enable URL Access Control - Check the box to activate URL
Access Control. Note that the priority for URL Access
Control is higher than Restrict Web Feature. If the web
content match the setting set in URL Access Control, the
router will execute the action specified in this field and ignore
the action specified under Restrict Web Feature.
Prevent web access from IP address - Check the box to deny
any web surfing activity using IP address, such as
http://202.6.3.2. The reason for this is to prevent someone
dodges the URL Access Control. You must clear your browser
cache first so that the URL content filtering facility operates
properly on a web page that you visited before.
Action – This setting is available only when Either : URL
Access Control First or Either : Web Feature First is
selected. Pass - Allow accessing into the corresponding
webpage with the keywords listed on the box below.
Block - Restrict accessing into the corresponding webpage
with the keywords listed on the box below.
If the web pages do not match with the keyword set here, it
will be processed with reverse action.
Group/Object Selections – The Vigor router provides several
frames for users to define keywords and each frame supports
multiple keywords. The keyword could be a noun, a partial
noun, or a complete URL string. Multiple keywords within a
frame are separated by space, comma, or semicolon. In
addition, the maximal length of each frame is 32-character
long. After specifying keywords, the Vigor router will decline
the connection request to the website whose URL string
matched to any user-defined keyword. It should be noticed that
the more simplified the blocking keyword list is, the more
efficiently the Vigor router performs.
Vigor3200 Series User's Guide
166
Advertisement
Table of Contents
