Table of Contents
Advertisement
VLAN Tag insertion
Active Mode and Backup
WAN/Backup Type
default setting for down link and up link is 10000Kbps.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on the
WAN while sending them out.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the number for such VLAN. The range is from
0 to 7.
Active Mode – Determine the WAN interface will be active for
always (Always On) or be treated as a backup WAN interface
(Backup).
Backup WAN/ Backup Type – Determine the role of such
WAN interface. It will be changed according to the Active
Mode specified.
If you choose Always On as Active Mode, you can choose one
of the backup WAN interfaces from the Backup WAN drop
down list. Later, when such WAN is disconnected for some
reason, the backup WAN will be activated automatically to
prevent data transmission from connection interrupted.
If you choose Backup as the Active Mode, Backup WAN will
be changed into Backup Type. You have to specify which role
the WAN interface should play if you want to backup multiple
WANs.
When any WAN disconnect –WAN1 will be activated when
any master WAN interface disconnects.
When all WAN disconnect –WAN1 will be activated when all
master WAN interfaces disconnect.
33
Vigor3200 Series User's Guide
Advertisement
Table of Contents
