Table of Contents
Advertisement
Profile Name
Enable this profile
VPN Dial-Out Through
Netbios Naming Packet
Specify a name for the profile of the LAN-to-LAN connection.
Check here to activate this profile.
Use the drop down menu to choose a proper WAN interface for
this profile. This setting is useful for dial-out only.
WAN1 /WAN2 /WAN3 /WAN4 /WAN5 First - While
connecting, the router will use WAN1 /WAN2 /WAN3 /WAN4
/WAN5 as the first channel for VPN connection. If WAN1 fails,
the router will use another WAN interface instead.
WAN1 /WAN2 /WAN3 /WAN4 /WAN5 Only - While
connecting, the router will use WAN1 /WAN2 /WAN3 /WAN4
/WAN5 as the only channel for VPN connection.
Pass – click it to have an inquiry for data transmission between
the hosts located on both sides of VPN Tunnel while
connecting.
Block – When there is conflict occurred between the hosts on
both sides of VPN Tunnel in connecting, such function can
block data transmission of Netbios Naming Packet inside the
209
Vigor3200 Series User's Guide
Advertisement
Table of Contents
