Remote Access Code - AT&T EL52103 User Manual

Answering system
Answering system settings

Remote access code

To access your answering system remotely from any touch-tone telephone,
you need to enter a 2-digit number (00-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
1. Press mEnU/
main menu.
2. Press or
CID
press /SElECT.
mEnU
3. Press or
CID
press /SElECT.
mEnU
4. Press or
CID
/SElECT.
mEnU
5. Press or
CID
use the dialing keys to enter the correct number (00-99).
6. Press /SElECT to save your setting.
mEnU
note: For more details about the remote access feature, refer to Remote access on page 65.
in idle mode to enter the
SElECT
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to scroll to Remote code, then press
DIR
to select the remote access code, or
DIR
53
Remote code
ECO
Remote code
19
ECO