Remote Access Code - AT&T DL72130 Complete User's Manual

Answering system
Answering system settings

Remote access code

To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access
code is 19.
To change the remote access code:
1. Press MENU/
2. Press or
CID
/SELECT
MENU
3. Press or
CID
/SELECT
MENU
4. Press or
CID
/SELECT
MENU
5. Use the dialing keys to enter a two-digit number.
-OR-
Press or
CID
/SELECT
6. Press
MENU
in idle mode.
SELECT
to highlight Answering sys, then press
DIR
.
to highlight Ans sys setup, then press
DIR
.
to highlight Remote code, then press
DIR
.
to scroll to a desired two-digit number.
DIR
to confirm.
108
Remote code
ECO
Remote code
19
ECO