Answering System; Answering System Settings; Announcement; Announcement Settings - AT&T EL52103 User Manual

Answering system

Answering system settings

Use the answering system menu in the handset to turn the answering
system on or off or change the settings for the outgoing announcement, call
screening, number of rings, remote access code and the message alert tone.

Announcement

The announcement is the greeting callers hear when calls are answered by
the answering system.
The telephone has a default announcement, "Hello. Please leave a message
after the tone." You can use this announcement, or record your own
announcement.
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than 2 seconds.
To play the current announcement:
Press mEnU/
1.
2. Press or
CID
then press
mEnU
3. Press /SElECT to select Announcement.
mEnU
The system announces, "To play, press 2. To record,
press 7."
4. Press 2 to play the current announcement from
the speakerphone.
• Press
DIR
/volUmE to decrease the message
CID
playback volume.
• Press /SPEAKER to switch between
speakerphone and handset.
in idle mode.
SElECT
to scroll to Answering sys,
DIR
/SElECT.
/volUmE to increase or press
48
Answering sys
ECO
Announcement
ECO
Play Del Rec
[2] [3] [7]
ECO