AT&T EL52103 User Manual page 78

Appendix
Handset display screen messages
number repeated
out of range or
no pwr at base
outside call
Paging
Phone
Put in charger
Quiet mode off
Quiet mode on
Rec mem low
Rec mem full
Ringer muted
Saved
Speaker
To register HS...
...see manual
To screen call
press [SElECT]
Transferred
Unable to call
Unable to save
xx missed calls
xx new messages
The telephone number you have entered is already stored in
the directory.
The handset has lost communication with the telephone base.
You switch to an external call during an intercom call.
The telephone base is paging all handsets.
The handset is on a call.
The battery is very low. The handset should be placed in the
telephone base or charger.
The quiet mode is turned off.
The quiet mode is turned on.
The answering system has less than 3 minutes to record.
The answering system memory is full.
The ringer is muted temporarily during an incoming call.
An entry has been successfully saved in the directory.
The handset speakerphone is in use.
The handset is not registered to any telephone base.
The system is recording a message. Press SElECT to screen a call
on a handset.
You have transferred an outside call to another cordless handset.
•
Intercom failed.
•
You try to join a call when there are already four handsets on
that call.
•
You try to make a call when the handset is out of range.
You cannot save a caller ID log entry to the directory without a
number.
There are XX new calls in the caller ID log.
There are XX new messages in the answering system.
72