Message Alert Tone - AT&T EL52103 User Manual

Answering system
Answering system settings

message alert tone

When the message alert tone is on, and there is at least one new message,
the telephone base beeps every 10 seconds. By default, the message alert
tone is set to oFF.
To change the setting:
1. Press mEnU/
main menu.
2. Press or
CID
press /SElECT.
mEnU
3. Press or
CID
press /SElECT.
mEnU
4. Press or
CID
press /SElECT.
mEnU
5. Press or
CID
6. Press /SElECT to save your setting.
mEnU
notes:
• The message alert tone beeps only if all the conditions below are met:
– The answering system is on.
– The message alert tone is on.
– There are new messages.
• To temporarily turn off the message alert tone, see Temporarily turn off the message alert
tone on page 59.
in idle mode to enter the
SElECT
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to scroll to msg alert tone, then
DIR
to choose on or off.
DIR
54
Msg alert tone
ECO
Tone: Off
ECO