Handset Locator; Web Address - AT&T EL52103 User Manual

Telephone operation

Handset locator

You can use the handset locator feature to find
misplaced handsets.
To start the paging tone:
• Press /HAnDSET loCAToR on the telephone
base to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
• Press PHonE/
oFF
/
CAnCEl
the handset(s).
-oR-
/HAnDSET loCAToR on the
• Press
telephone base.
-oR-
• Place the handset in the telephone base or charger.
notes:
• If you press mUTE/
tone continues on the other handsets.
• If a handset is accessing the answering system, on a call (intercom call or outside call), or out
of range, that handset does not beep when paged.
• You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.

Web address

You can use the web address feature to view the AT&T
website address.
Press mEnU/
1.
2. Press or
CID
press /SElECT. The screen shows the AT&T
mEnU
Website address.
, /SPEAKER,
FlASH
or any dialing key (0-9,
on a handset, the ringer of that handset is silenced but the paging
DElETE
in idle mode.
SElECT
to scroll to Web address, then
DIR
or #) on
27
TONE
www.telephones.
ECO
att.com
ECO