Answering system
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access
code is 19.
To change the remote access code:
1. Press
MENU/
or
2. Press CID
/SELECT
MENU
or
3. Press CID
/SELECT
MENU
or
4. Press CID
/SELECT
MENU
5. Use the dialing keys to enter a two-digit number.
-OR-
or
Press CID
/SELECT
6. Press
MENU
in idle mode.
SELECT
to highlight Answering sys, then press
.
to highlight Ans sys setup, then press
.
to highlight Remote code, then press
.
to scroll to a desired two-digit number.
to confirm.
110
Remote code
ECO
Remote code
19
ECO