Call Intercept; Temporarily Turn Off The Message Alert; Tone - AT&T EL52103 User Manual

Answering system
Answering system overview

Call intercept

While call screening, you can stop the recording and speak to the caller.
• If the call is screened at the base, press
on the handset to stop recording and speak to the caller.
• If the call is screened at the handset, press
handset to stop recording and speak to the caller. You can press
/SPEAKER to switch between the speakerphone and the handset.
Temporarily turn off the message alert tone
If the message alert tone is turned on, the telephone base beeps every ten
seconds when there are new messages. Pressing any telephone base key
(except /HAnDSET loCAToR) temporarily silences the message alert tone.
If you press x/DElETE when in idle mode to temporarily turn off the
message alert tone, there is a voice prompt directing you to press x/DElETE
again to delete all old messages. The message alert tone is temporarily off.
Only press x/DElETE a second time if you wish to erase all old messages in
your answering system.
The message alert tone resumes when you receive another message.
PHonE/
PHonE/
59
/SPEAKER
or
FlASH
on the
FlASH