Answering system
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone
phone, you need to enter a two-digit number (00-99). By default,
the remote access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press
MENU/
SELECT
2. Press q
CID
then press
3. Press q
CID
then press
4. Press q
CID
then press
5. Use the dialing keys to enter a two-digit number.
Press
MUTE
digit.
6. Press
MENU
confirmation tone.
to enter the main menu.
or p
to scroll to Answering sys,
DIR
/SELECT.
MENU
to scroll to Ans sys setup,
or p
DIR
/SELECT.
MENU
to scroll to Remote code,
or p
DIR
/SELECT.
MENU
/DELETE to backspace and delete a
/SELECT to save the setting. You hear a
110
Play messages
>Answering sys
Voice guide
>Ans sys setup
REMOTE CODE
19